Nothing is more irritating when you’re trying to binge some Netflix than laying down on your couch and sliding off because the cushions won’t stay in place.
Some couch designs make it difficult for sofa cushions to stay in place. Other times, the safeguards that are in place simply begin to wear and don’t do as good of a job at holding the seat cushions in place any longer.
Today, we’re sharing 5 easy DIY ways to keep your living room couch cushions from sliding so that you can rest comfortably and securely.
How to Stop Your Couch Cushions From Sliding
If sliding cushions is a problem for you, we have 4 DIY ways you can easily stop those sofa cushions from sliding. Your options include:
- Shelf Liner
- Velcro
- Non-Slip Mats
- Slip Covers
1. Using A Shelf Liner
One way to stop sofa cushions from slipping and sliding is to underlay a non-adhesive drawer liner beneath and on the back of the cushions on your couch. You might already have some in your house to use.
The rubbery surface of the drawer liner will keep the smooth upholstery of your couch covers from sliding back and forth.
Here’s what you need to do:
- Remove your cushions.
- Measure the width and depth of your couch cushion area for the back and seat areas.
- Cut your drawer liner to meet those measurements.
- Place the liner down on the seating area and replace those cushions first.
- As you are using a non-adhesive liner, you will likely have to replace your back cushions and then place the liner underneath them that way.
2. Try Velcro
If the shelf-liner option is a no-go for you, you could also try velcro strips on the back and bottom of the cushions as a way to stop cushions from sliding. Make sure to invest in good quality, thick velcro strips for this as they will need to withstand the pressure of people sitting on the sofa.
Here’s what you need to do
- Remove your cushions.
- Measure the width of your couch cushions.
- Cut matching velcro strips for each cushion and corresponding area of the couch frame.
- Be sure the areas where you place your velcro strips line up before peeling the backs off.
- Peel and stick your velcro pieces to the cushions and frame.
- Step 6: Secure the cushions firmly and allow the adhesive to dry before sitting down.
3. Stop Sliding with Non-Slip Mats
Another option is to utilize a couch underlay pad on the bottom of the cushions to keep them from sliding. These slip pads are similar to what you would use for an area rug.
Similar to how you would for an area rug, follow these steps for this option:
- Remove your cushions.
- Measure the width and depth of your couch cushion area for the back and seat areas.
- Cut your slip pad to meet those measurements.
- Place the liner down on the seating and back area and place the cushions over it.
4. Try Out Slip Covers
If you’re not a fan of putting items underneath your couch cushions, another option is a slip cover to keep our cushions in place. While a slip cover is a more costly option, it could also give your couch a fresh new look that might be needed if it’s seen a lot of wear and tear.
Keep in mind, however, it will have to be a very tight fitting slipcover in order for it to work well.
Try out this process:
- In order to make sure you purchase the right slipcover, keep your cushions on and measure the width, height, and depth of your couch.
- Find a slipcover that can accommodate those dimensions.
- Purchase your slipcover, open, and put it on.
Buy a Sofa Whose Couch Cushions Stay in Place
While the aforementioned 4 suggestions should solve your problem, if they don’t help, it may just be time to replace your old living room sofa. The average lifespan of a high-quality couch is 7-15 years. If you’re approaching that then it may be a good time to invest in a good replacement.
If you’ve decided to spring for a new sofa, Home of Cozy can help you pick out the best option for you. We can help you narrow down your options, show you the best sofa brands, and help you find the best place to buy a couch.